WASTE OIL HEATER Commercial - 300,000 BTU - Incl TW Chimney Kit & 80 Gal Tank

Description

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
_______________________________________________________________________________________________________
Model:
VIR9966B
Condition:
New
Description:
Waste Oil Heater - Commercial / Industrial
Features:
300,000 BTU - 120V, 4600 CFM Fan - 2.14 GPH Fuel Usage - Heating Area up to 10,000 Square Feet - Requires 2 CFM, 60 PSI Air Compressor to Operate - Galvanized Steel, Rust Resistant Cabinet - Adjustable Locking Louvers - Top, Back, Right or Left Exhaust Options -
This Package Includes Heater, 8" Thru Wall Chimney Kit and 80 Gallon Tank/Reservoir
- UL Listed - EPA Approved - Made in the USA
Payment Options:
We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing through
PayPal Credit
and Capital Finance through
Shipping:
We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote
Toll Free
Discounts:
We Offer Multiple Item Purchase Discounts - Please Inquire
Toll Free at
______________________________________________________________________________________________________
SEE OUR FULL LINE OF
WASTE OIL HEATERS
BY FOLLOWING THIS LINK:
OUR WASTE OIL HEATER & ACCESSORIES LINE
This Series of Heaters is Available in the Following Configurations:
150,000 BTU (heats up to 5,000 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits
200,000 BTU (heats up to 7,000 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits
250,000 BTU (heats up to 8,500 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits
300,000 BTU (heats up to 10,000 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits
200,000 BTU -
Ductable Heater
(heats up to 7,000 Sq. Ft.)
400,000 BTU -
Ductable Heater
(heats up to 7,000 Sq. Ft.)
Questions?  Ask our Experts,
Toll Free at
Description & Specifications:
Commercial/Industrial Lanair Waste Oil Heater - 300,000 BTU.  Heats up to 10,000 Square Feet (see heating area notes below).
This package includes heater, through wall venting/chimney kit and 80 tank/reservoir
Superior quality and technology make our waste oil heaters the most reliable, cost efficient waste oil heaters in the industry.  Our line of commercial/industrial waste oil heaters feature easy installation and modular low maintenance designs which simplify trouble shooting and repair.  We carry a full line of spares for all of our waste oil heaters throughout the year and offer over-the-phone technical assistance if needed
Why heat with waste oil?  from large fleet operators to small businesses, everyone benefits from clean, cost-efficient heat.  FREE heat!  As energy prices climb, waste oil heat is gaining popularity.  Not only does waste oil heat reduce your heating bills, it also eliminates the cost to haul used oil off-site.  Waste oil heaters usually pay for themselves in 12 to 18 months
Features: Fine grain galvanized rust-resistant cabinet, high performance burner, internal fan that reduces noise, adjustable locking louvers, top, back, right or left exhaust options
Includes: Heater, secondary air regulator, oil by-pass regulator, pump assembly, primary waste oil strainer, check valve, barometric damper, oil supply strainer and thermostat
Heat Range (BTUH): 300,000
Fuel Usuage - Continuous Run: 2.14 GPH
Heating Area: up to 10,000 Square Feet
Note: heating area is based on buildings with minimal heat loss due to open doors, construction, materials, windows, insulation and other weatherization factors.  Your heating area can be increased or decreased depending on your application
Axial Fan: 120V, 4,600 CFM
Compressed Air Required for Operation: 2 CFM - 60 PSI (an air compressor is not included - buyer needs to supply their own air compressor)
Flue: 8" Class A (use only Class A rated exhaust piping with this heater - see Optional Items below for Venting/Chimney Kits)
Flue Location: Top (with the introduction of an elbow, exhaust can be directed through the top, right, left or back of unit)
Combustion Chamber Construction: 10 Gauge CRS (cold rolled steel)
Cabinet: Fine Grain Galvanized Steel - Rust Resistant
Louvers: Adjustable and locking
Includes Remote Thermostat
This package includes: 300,000 BTU waste oil heater, 8" through wall venting/chimney kit and 80 gallon fuel tank/reservoir (see photo in this listing to see this setup)
Approvals and Listings: EPA 40 CFR 279.23 Approved - UL MH14518 Approved
Optional Item
:
Model VIR4894
- 8" Chimney Kit - Vertical - Through Roof Installation (
please inquire Toll Free
)
Optional Item
:
Model VIR4896
- 8" Chimney Kit - Horizontal - Through Wall Installation (
please inquire Toll Free
)
Optional Item
:
Model VIR3814
- Fuel Tank/Reservoir - 215 Gallon - Includes pedestal which integrates the heater and fuel tank into one unit (
please inquire Toll Free
)
Optional Item
:
Model VIR3770
- Fuel Tank/Reservoir - 80 Gallon - (
please inquire Toll Free
)
Optional Item
:
Model VIR9164
- Metering Pump - Maintains Burn Rate through Varying Viscosities of Oil - Tank/Reservoir can be up to 100 Ft away from heater using this pump - (
please inquire Toll Free
)
Please allow 2 weeks for delivery as this unit ships via truck freight
Overall Dimensions - Heater: 48" L x 46" W x 36" H
Ship Weight: 971 Lbs
1 Year Warranty 100% (Includes Parts & Labor) - 10 Year Warranty on Combustion Chamber/Heat Exchanger
Made in the U.S.A.
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
Track Page Views With
Auctiva's FREE Counter