-40%
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8
W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8

W M BERG ANODIZED ALUMINUM TIMING PULLEY / SPROCKET FOR MOTOR SHAFT 3/8" BORE

$ 9.5

Availability: 100 in stock
  • Condition: NO SET SCREWS ARE MISSING. EACH ONE HAS 2 SCREWS. THE ONES THAT WERE TORN OFF THE HEADER CARDS WERE REPACKAGED WITH DESICCANT TO CONTROL MOISTURE. I WANTED TO MAKE SURE THAT THEY WERE NOT DENTED FROM THE SCUFFS IN THE PACKAGING. THE ONE IN THE PICTURES THAT I AM HOLDING WAS THE WORST ONE I COULD FIND. I WOULD NEVER HIDE FLAWS.
  • Gear Material: ANODIZED ALUMINUM
  • Country/Region of Manufacture: United States
  • Model: PIN HUB 2 SET SCREWS
  • MPN: 24B6-48
  • Brand: WINFRED M BERG
  • Number Of Teeth: 48
  • All returns accepted: ReturnsNotAccepted
  • Bore Diameter: 3/8"

    Description

    DRAWER 47
    BUY IT NOW IS FOR ONE PIECE
    WARNING DO NOT PAY FOR THESE FROM A MOTION DISTRIBUTOR !
    SAME DAY SHIPPING IF PAID BEFORE NOON EASTERN TIME !
    .50 FLAT SHIPPING RATE FOR ANY QUANTITY !
    THIS TIMING PULLEY USES EXOTIC PROPRIETARY DRIVE BELTS THAT ARE EXPENSIVE AND HARD TO FIND.  YOU HAVE TO USE THEIR EXPENSIVE TIMING BELTS.  I DO NOT HAVE ANY NOR WILL I MAKE ANY CLAIMS AS TO WHAT WILL WORK OR NOT WORK WITH THIS PART. YOU MUST KNOW WHAT IT IS FOR AND WHAT IT IS
    COMPATIBLE
    WITH.
    MOST PEOPLE BUY THESE TO MAKE THEIR OWN PULLEYS ON A LATHE.
    YOU TURN THE TEETH OFF AND MACHINE A GROOVE INTO IT TO MATCH THE WIDTH OF YOUR BELT.
    YOUR PULLEY WILL HAVE THE TEETH INTACT. PLEASE NOTE THAT THERE ARE SOME MINOR DIFFERENCES IN THE ANODIZING AND YOU WILL RECEIVE ONE PULLEY RANDOMLY PICKED FROM THE INVENTORY.
    BUY ONE AND PUT IT ON YOUR LATHE AND TURN IT INTO WHATEVER YOU NEED.
    These will be
    rolled in
    bubble wrap to protect the teeth from damage
    These would never be placed together so that the teeth would scratch one another.
    PLEASE NOTE THAT NONE OF THE EXTRAS OR MEASURING INSTRUMENTS ARE PART OF THE SALE.
    If you pay before noon Eastern time these will be mailed the same day !